GHD Hair Straighteners Repair Solution 606

GHD Hair Straighteners Repair Solution

We all dread the day, plugging our appliance in the socket and flick the switch and nothing, a deadly silence, not a hum nor a beep. Our GHD is dead, or so it would seem. You may have one lying in a bottom draw or under the bed or in a tatty old box in the attic. Well pull that old GHD out and bring it back to life! Did you know by spending only a few pounds on a new cable could have your old GHD working as good as new? Get your screwdriver at the ready and listen how to do your own GHD repairs service.

Before doing the repairs on your GHD you will need to get yourself a new power cable. These can be picked up by doing a quick internet search and bought online. They should only cost you a few pounds, a fraction of the price of a new pair of GHD Hair Straighteners UK's.

Once you receive your new compatible GHD power cable you will need to perform the GHD repairs service to you hair straighteners. Now, you don't need to be an engineer or a brain surgeon but you will need a fine screw driver, they are know as micro-screwdrivers and most guys have a set them in their tool box. Now if your faulty GHD is over 2-3 years old then follow these repair instructions;

a.) Hold your GHD together with a hair or elasticated band so the plates are pushed together, this will make it easier for you to carry out the rest of the GHD repair service.

b.) Now at the back of the GHD straighteners near the cable end there is an elastic rubber band, gently ease this band off the back of the iron, it may help if you use the micro-screwdriver to help you do this.

c.) Next to where the rubber band was at the cable end of the straighteners, if you look closely you should see two small screws hidden in the small gap.

d.) With your micro-screwdriver remove these two screws.

e.) Now for the cable change part of your GHD repair service. The plastic cap at the back of the iron should now be loose and you should be able to remove it, making the GHD power cable connector visible.

f.) You will be able to see how the cable connects to the GHD with a metal pin going into a female connector. You should be able to remove this pin from the connector simply.

g.) Time to replace your old faulty GHD cable with a fresh new GHD cable and complete your GHD repair service. At this point you will need to remove the rubber band that was on the GHD UK and slot this onto your new cable, now slot the new cable back into the female connector in the GHD.

h.) Once in place, re-fit the plastic cap to the back of the GHD straighteners and screw back into place with the two small screws and your micro-screwdriver. Then re-fit the rubber band to hold in place.

That should be it, your GHD repairs service complete and now for the moment of truth, plug your GHD hair straighteners in and switch them on. Well done, you are now a GHD service expert, go out there and find more GHD straighteners and do more GHD repairs.

Please note we would always suggest any repair to be checked by a qualified GHD repairs and service engineer and all GHD repairs are done at your own risk. If in doubt find a qualified GHD repair service engineer, many can be found by doing an internet search. Please see the resources box for more details.